CT Series Wet Magnetic Separator

CT Series Wet Magnetic Separator

Wet Magnetic Separator Introduction

CT Series Wet Magnetic Separators consist of separator drum, magnetic system, separator tank, transmission device and overflow devices for feeding and discharging. They are widely applied in magnetically separating magnetite, de-watering and de-ironing for non-metallic ores. According to different working principles, they are classified into three Kinds: current style(S), counter-current style (N) and Semi-countercurrent style (B).

Wet Magnetic Separator Working Principle

The mineral slurry flows into the cell through box feeder, the mineral particle is loose under the function of water flow of feeder water pipe when they flow into the cell. Affected by magnetic field, the magnetic particle swarm together and form magnetic cluster or chain. With the magnetism of mineral slurry, the magnetic cluster or chain moves toward the magnetic pole, and is absorbed to the cylinder.

Because of the polarity of magnetic pole, the revolving directions alternate constantly, and remain fixed when it is working. When the magnetic cluster and chain go round and round along with the cylinder, the mingled gangue and other non-magnetic ore fall down due to the mixing phenomena produced by alternation of magnetic poles, and it is concentrate that is absorbed to the cylinder surface.

The concentrate moves to the end of magnetic system where the magnetism is weakest along with the revolving cylinder, and is discharged into concentrate tank by the current ejected by the discharging-ore pipe. The non-magnetic or weak magnetic remained are discharged along with the mineral slurry, and they are gangue

  • The magnet is made from rare-earth permanent magnetic material--NdFeB; Stainless steel separator drum is covered with rubber to achieve higher separation performance; The wearable ceramic drum is optional.
  • Magnetic system adjusting device can adjust magnetic angle to achieve good separation performance.
  • CT series wet magnetic separators can be used singly, multiply or parallelly.
  • They are suitable for rough or fine separating strong magnetic minerals smaller than 0.2mm.